Blizzard Underbench Bullet Ice Maker 25Kg - SN-25C
A special built-in spray-type evaporator increases the transparency and hardness of the ice special injection tank is simple and clean, has a nice heat preservation performance, and effectively keeps ice hard.
Key Features
- Bin Storage: Approx. 15kg (Bin Control Setting Approx. 6kg)
- Output/24Hr: Up to 25kg
- Storage: 15kg
- High Hardness
- Compact Design
- Stainless Steel Exterior
- Ice Size: 28mmø×40mm
- Easily Accessible On-Off Switch
- Watermark certified product sticker
2 Years Parts and Labour Warranty
| Doors | 1 |
|---|---|
| Door Type | Hinged Doors |
| Body | Stainless Steel |
| Net Weight (Kg) | 39 |
| Width (mm) | 375 |
| Depth (mm) | 575 |
| Height (mm) | 762 |
| Packing Width (mm) | 665 |
| Packing Depth (mm) | 470 |
| Packing Height (mm) | 740 |
| Power | 240V/50Hz; 300W; 10A outlet required |
| Warranty | 2 Years Parts and Labour |
All Ice machines MUST be maintained to ensure high performance.
The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.
This maintains the quality of the ice shape and thickness.
- Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler.
- Sanitise water reservoir, distribution tubes, and bin interior.
- Clean and flush condenser coils (air-cooled units).
- Inspect condenser fan motor and blades.
- Check inlet water valve, float, and filters for correct operation.
- Verify ice thickness probe or sensor calibration.
- Inspect refrigerant pressures, superheat, and subcooling - adjust if necessary.
- Test compressor amperage and general performance.
- Inspect water pump operation and clean pump housing.
- Check harvest cycle operation (heater or hot gas valve).
- Inspect electrical connections, relays, and contactors.
- Replace inline water filter cartridge.
This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance.
If your ice machine is not maintained, your warranty may be void.
Call 1300 887 055 or email
[email protected]
Blizzard Underbench Bullet Ice Maker 25Kg - SN-25C
: 10 +
In stock
Silver Chef Rent-Try-Buy & Best Price Guarantee
30 Day Money Back Guarantee & Free Returns. Terms&Conditions Apply
Industry leading 24 hours 7 days after hour service!
Blizzard Underbench Bullet Ice Maker 25Kg - SN-25C
A special built-in spray-type evaporator increases the transparency and hardness of the ice special injection tank is simple and clean, has a nice heat preservation performance, and effectively keeps ice hard.
Key Features
- Bin Storage: Approx. 15kg (Bin Control Setting Approx. 6kg)
- Output/24Hr: Up to 25kg
- Storage: 15kg
- High Hardness
- Compact Design
- Stainless Steel Exterior
- Ice Size: 28mmø×40mm
- Easily Accessible On-Off Switch
- Watermark certified product sticker
2 Years Parts and Labour Warranty
| Doors | 1 |
|---|---|
| Door Type | Hinged Doors |
| Body | Stainless Steel |
| Net Weight (Kg) | 39 |
| Width (mm) | 375 |
| Depth (mm) | 575 |
| Height (mm) | 762 |
| Packing Width (mm) | 665 |
| Packing Depth (mm) | 470 |
| Packing Height (mm) | 740 |
| Power | 240V/50Hz; 300W; 10A outlet required |
| Warranty | 2 Years Parts and Labour |
All Ice machines MUST be maintained to ensure high performance.
The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.
This maintains the quality of the ice shape and thickness.
- Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler.
- Sanitise water reservoir, distribution tubes, and bin interior.
- Clean and flush condenser coils (air-cooled units).
- Inspect condenser fan motor and blades.
- Check inlet water valve, float, and filters for correct operation.
- Verify ice thickness probe or sensor calibration.
- Inspect refrigerant pressures, superheat, and subcooling - adjust if necessary.
- Test compressor amperage and general performance.
- Inspect water pump operation and clean pump housing.
- Check harvest cycle operation (heater or hot gas valve).
- Inspect electrical connections, relays, and contactors.
- Replace inline water filter cartridge.
This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance.
If your ice machine is not maintained, your warranty may be void.
Call 1300 887 055 or email
[email protected]
Don't have an account? Create An Account