2NDs: Blizzard Under Bench Ice Maker Air Cooled - SN-80P-NSW2181
Lot Number: NSW2181
Class: 3
Conditions: Used Unit has lite scratch mark and stains throughout external left and right surfaces. Unit operating correctly and making Ice perfectly. Unit tested ok.
Warranty: 30 Days
Key Features
- Output /24h: Up to 36kg
- Ice Storage Capacity: Approx. 15 kg (Bin Control Setting Approx. 8.5kg)
- Voltage (V/HZ): 220/50
- Power (W): 300
- Condenser Unit: Air
- Compact Design
- Stainless Steel Exterior
- Easily Accessible On-Off Switch
- Cube Ice: 22mm³
- Storage (kg): 15
- Includes an internal drain pump
- Watermark certified product sticker
| Doors | 1 |
|---|---|
| Door Type | Hinged Doors |
| Body | Stainless Steel |
| Net Weight (Kg) | 36 |
| Width (mm) | 500 |
| Depth (mm) | 450 |
| Height (mm) | 800 |
| Packing Width (mm) | 580 |
| Packing Depth (mm) | 530 |
| Packing Height (mm) | 835 |
| Power | 240V; 370W; 10amp plug and lead included |
| Warranty | 30 Days |
All Ice machines MUST be maintained to ensure high performance.
The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.
This maintains the quality of the ice shape and thickness.
- Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler.
- Sanitise water reservoir, distribution tubes, and bin interior.
- Clean and flush condenser coils (air-cooled units).
- Inspect condenser fan motor and blades.
- Check inlet water valve, float, and filters for correct operation.
- Verify ice thickness probe or sensor calibration.
- Inspect refrigerant pressures, superheat, and subcooling - adjust if necessary.
- Test compressor amperage and general performance.
- Inspect water pump operation and clean pump housing.
- Check harvest cycle operation (heater or hot gas valve).
- Inspect electrical connections, relays, and contactors.
- Replace inline water filter cartridge.
This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance.
If your ice machine is not maintained, your warranty may be void.
Call 1300 887 055 or email
[email protected]
2NDs: Blizzard Under Bench Ice Maker Air Cooled - SN-80P-NSW2181
: 1
• Low Stock
Silver Chef Rent-Try-Buy & Best Price Guarantee
30 Day Money Back Guarantee & Free Returns. Terms&Conditions Apply
Industry leading 24 hours 7 days after hour service!
2NDs: Blizzard Under Bench Ice Maker Air Cooled - SN-80P-NSW2181
Lot Number: NSW2181
Class: 3
Conditions: Used Unit has lite scratch mark and stains throughout external left and right surfaces. Unit operating correctly and making Ice perfectly. Unit tested ok.
Warranty: 30 Days
Key Features
- Output /24h: Up to 36kg
- Ice Storage Capacity: Approx. 15 kg (Bin Control Setting Approx. 8.5kg)
- Voltage (V/HZ): 220/50
- Power (W): 300
- Condenser Unit: Air
- Compact Design
- Stainless Steel Exterior
- Easily Accessible On-Off Switch
- Cube Ice: 22mm³
- Storage (kg): 15
- Includes an internal drain pump
- Watermark certified product sticker
| Doors | 1 |
|---|---|
| Door Type | Hinged Doors |
| Body | Stainless Steel |
| Net Weight (Kg) | 36 |
| Width (mm) | 500 |
| Depth (mm) | 450 |
| Height (mm) | 800 |
| Packing Width (mm) | 580 |
| Packing Depth (mm) | 530 |
| Packing Height (mm) | 835 |
| Power | 240V; 370W; 10amp plug and lead included |
| Warranty | 30 Days |
All Ice machines MUST be maintained to ensure high performance.
The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.
This maintains the quality of the ice shape and thickness.
- Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler.
- Sanitise water reservoir, distribution tubes, and bin interior.
- Clean and flush condenser coils (air-cooled units).
- Inspect condenser fan motor and blades.
- Check inlet water valve, float, and filters for correct operation.
- Verify ice thickness probe or sensor calibration.
- Inspect refrigerant pressures, superheat, and subcooling - adjust if necessary.
- Test compressor amperage and general performance.
- Inspect water pump operation and clean pump housing.
- Check harvest cycle operation (heater or hot gas valve).
- Inspect electrical connections, relays, and contactors.
- Replace inline water filter cartridge.
This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance.
If your ice machine is not maintained, your warranty may be void.
Call 1300 887 055 or email
[email protected]
We found other products you might like!
Don't have an account? Create An Account
Suggested for You