2NDs: Blizzard Chewblet/Nugget Ice Maker 250Kg - SN-258N-NSW2190
Lot Number: NSW2190
Class: 3
Conditions: Returned used unit has lite scratch mark on external throughout unit, Unit operating correctly and making ice correctly. Unit tested ok.
Warranty: 30 Days
Key Features
- Storage: 125Kg
- Ice Type: Chewblet/Nugget Ice
- Average Output: 250 kg/24H
- High Hardness for durable ice quality
- Compact Design for space efficiency
- Stainless Steel Exterior for durability and hygiene
- Easily Accessible On/Off Switch for convenience
- Simple Maintenance & Modular Design – easy to move and service
High-Quality Components
- German EBM-Pabst Fans
- Hisakage PLC control system
- Denmark Danfoss Expansion Valve & Air Filter
- AIR-COOLED system for efficient operation
- Japanese Saginomiya Solenoid & Hydraulic Valve
- U.S. Morrill Water Pump
- Fully Automatic & Precise Control System for reliable performance
| Doors | 1 |
|---|---|
| Door Type | Hinged Doors |
| Body | Stainless Steel |
| Net Weight (Kg) | 115 |
| Width (mm) | 560 |
| Depth (mm) | 860 |
| Height (mm) | 1795 |
| Packing Width (mm) | 630 |
| Packing Depth (mm) | 655+625 |
| Packing Height (mm) | 1110 |
| Power | 220-240V/50HZ, 1180W;10A |
| Warranty | 30 Days |
All Ice machines MUST be maintained to ensure high performance.
The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.
This maintains the quality of the ice shape and thickness.
- Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler.
- Sanitise water reservoir, distribution tubes, and bin interior.
- Clean and flush condenser coils (air-cooled units).
- Inspect condenser fan motor and blades.
- Check inlet water valve, float, and filters for correct operation.
- Verify ice thickness probe or sensor calibration.
- Inspect refrigerant pressures, superheat, and subcooling - adjust if necessary.
- Test compressor amperage and general performance.
- Inspect water pump operation and clean pump housing.
- Check harvest cycle operation (heater or hot gas valve).
- Inspect electrical connections, relays, and contactors.
- Replace inline water filter cartridge.
This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance.
If your ice machine is not maintained, your warranty may be void.
Call 1300 887 055 or email
[email protected]
2NDs: Blizzard Chewblet/Nugget Ice Maker 250Kg - SN-258N-NSW2190
: 1
• Low Stock
Silver Chef Rent-Try-Buy & Best Price Guarantee
30 Day Money Back Guarantee & Free Returns. Terms&Conditions Apply
Industry leading 24 hours 7 days after hour service!
2NDs: Blizzard Chewblet/Nugget Ice Maker 250Kg - SN-258N-NSW2190
Lot Number: NSW2190
Class: 3
Conditions: Returned used unit has lite scratch mark on external throughout unit, Unit operating correctly and making ice correctly. Unit tested ok.
Warranty: 30 Days
Key Features
- Storage: 125Kg
- Ice Type: Chewblet/Nugget Ice
- Average Output: 250 kg/24H
- High Hardness for durable ice quality
- Compact Design for space efficiency
- Stainless Steel Exterior for durability and hygiene
- Easily Accessible On/Off Switch for convenience
- Simple Maintenance & Modular Design – easy to move and service
High-Quality Components
- German EBM-Pabst Fans
- Hisakage PLC control system
- Denmark Danfoss Expansion Valve & Air Filter
- AIR-COOLED system for efficient operation
- Japanese Saginomiya Solenoid & Hydraulic Valve
- U.S. Morrill Water Pump
- Fully Automatic & Precise Control System for reliable performance
| Doors | 1 |
|---|---|
| Door Type | Hinged Doors |
| Body | Stainless Steel |
| Net Weight (Kg) | 115 |
| Width (mm) | 560 |
| Depth (mm) | 860 |
| Height (mm) | 1795 |
| Packing Width (mm) | 630 |
| Packing Depth (mm) | 655+625 |
| Packing Height (mm) | 1110 |
| Power | 220-240V/50HZ, 1180W;10A |
| Warranty | 30 Days |
All Ice machines MUST be maintained to ensure high performance.
The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.
This maintains the quality of the ice shape and thickness.
- Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler.
- Sanitise water reservoir, distribution tubes, and bin interior.
- Clean and flush condenser coils (air-cooled units).
- Inspect condenser fan motor and blades.
- Check inlet water valve, float, and filters for correct operation.
- Verify ice thickness probe or sensor calibration.
- Inspect refrigerant pressures, superheat, and subcooling - adjust if necessary.
- Test compressor amperage and general performance.
- Inspect water pump operation and clean pump housing.
- Check harvest cycle operation (heater or hot gas valve).
- Inspect electrical connections, relays, and contactors.
- Replace inline water filter cartridge.
This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance.
If your ice machine is not maintained, your warranty may be void.
Call 1300 887 055 or email
[email protected]
Don't have an account? Create An Account